Polyanion · sodium-ion battery

Energy no longer limited by temperature or resources

King-Sodium focuses on the R&D, manufacturing and system integration of polyanion sodium-ion batteries. From AA-size consumer cells to 2,500Ah large-format cells and MWh-scale storage systems, we turn wide temperature range, intrinsic safety and unrestricted resources into deliverable products.

Discharges at −50°C0V rechargeableIntrinsic safety800 cycles @70%No lithium, cobalt or nickel
All 12 safety tests passed · SGS report CGE20251100120081 · Luoding 10GWh plant in production
Rate discharge1000 A
Operating temperature range−50 ~ +60℃
0 APeak discharge current
Low-impedance full-tab design
−0℃Low-temperature discharge limit
Capacity retention ≥80%
0 MWhStorage capacity per container
KS container system
0 itemsGranted & pending patents
covering materials / structure / process
King-Sodium Series 5AA size, 3.0V 460mAh, discharges at −50°C, rechargeable from 0VSpecificationsLarge-format cylindrical cell120420 series, from 280Ah up to 2,500Ah per cellSpecification comparisonKS energy storage system720V / 800kW / 2h container covering C&I and residentialSystem configurationPartnershipThree partnership tracks: regional distribution / system integration / industryPartnership policy
PRODUCT LINES

One material system, three delivery forms

One polyanion + hard carbon system, tiered by energy density, rate capability and cost, covering consumer, traction and storage.

King-Sodium Series 5

AA / 14500 standard size · 3.0V · 460mAh · 1.5Wh

For consumer electronics, smart locks, remote controls, electric toys and cold-climate backup power. In the standard 14500 size (φ14 × 50mm) it directly replaces equivalent lithium and alkaline designs, still discharging normally at −50°C and recovering from deep discharge to 0V, avoiding over-discharge write-offs.

0VNominal voltage
0mAhNominal capacity
0WhNominal energy
0cyclesCycle life @70%

Wide-temperature performance

Discharge retention at −50°C≥80%
Discharge retention at −20°C≥92%
+60°C high-temperature cycling≥88%

Test conditions: 0.5C discharge to 2.0V; nominal capacity at 25°C taken as 100%.

Safety & compliance

  • All 12 safety tests passed (overcharge / over-discharge / short circuit / crush / nail penetration / thermal box, etc.)
  • SGS report CGE20251100120081
  • UN 38.3 transport certified
  • RoHS / REACH compliant
  • Recovers from 0V over-discharge, no swelling

Key specifications

King-Sodium Series 5 · Key specifications NaMao-5 / AA 14500
Product modelKing-Sodium Series 5 (AA / 14500)
Nominal voltage3.0 V
Nominal capacity460 mAh @0.2C
Nominal energy1.5 Wh
Dimensionsφ14.0 × 50.0 mm
Weight≈ 21 g
Charge cut-off voltage4.0 V
Discharge cut-off voltage2.0 V
Max continuous discharge2C (920 mA)
Peak pulse discharge1,000 A (millisecond class)
Operating temperature · discharge−50℃ ~ +60℃
Operating temperature · charge−20℃ ~ +55℃
Cycle life≥800 cycles @70% retention
Self-discharge rate≤3% / month @25°C

On 0V rechargeability

King-Sodium Series 5 resumes normal charging after over-discharge to 0V, avoiding the internal short caused by copper dissolution — markedly better than conventional lithium designs in storage, transport vibration and series mismatch.

Large-format cylindrical cell 120420 series

φ120 × 420 mm · from 280Ah · up to 2,500Ah per cell

Large cylindrical construction is the natural answer to sodium-ion cost and safety. A larger winding diameter means fewer case and connector parts, a shorter average electron path and more uniform heat dissipation. Using 280Ah as the baseline, King-Sodium's 120420 series pushes per-cell capacity to 2,500Ah through electrode formulation and stacking-density optimisation, giving utility storage and heavy-truck swapping fewer series links and higher system reliability.

0AhBaseline capacity
0AhMaximum capacity
0APeak discharge
0mmCase diameter

Capacity tiers & fit

ModelCapacityTypical applications
120420-280280 AhC&I storage / telecom backupok
120420-600600 AhUtility container / PV-storageinfo
120420-12001200 AhGrid-side peak regulation / shared storageinfo
120420-25002500 AhHeavy-truck swapping / marineaccent
Volumetric utilisation92%
Pack efficiency88%
Capacity consistency ±±2%

Versus prismatic aluminium cases, large cylindrical cells use about 22% fewer case and structural parts at equal capacity.

Why large cylindrical

  • Fewer parts → lower cost per Wh
  • Uniform winding tension → longer cycle life
  • Cylindrical case's natural vent path → more controllable runaway boundary
  • Standard size → easier modular and automated build

Delivery & engineering support

  • Full documentation pack: datasheet, MSDS, UN38.3 report
  • 3D models and module reference designs
  • Supports BMS protocol integration and tuning
  • Custom terminals & case marking on volume orders

KS-1.7MWh

Containerised utility-scale storage

0MWhCapacity per container
0VDC voltage

720V / 800kW / 2h configuration, scalable in parallel to hundred-MWh plants.

KS-C&I

C&I storage cabinet

0kWhCapacity per cabinet
0kWRated power

Peak-valley arbitrage plus demand management, with parallel cabinets and cloud EMS dispatch.

KS-Home

Residential storage

0kWhCapacity per unit
0kWInverter power

Wall-mounted or floor-standing, paired with PV for self-consumption and emergency backup.

KS-Telecom

Telecom backup

0VStandard voltage
0AhCapacity per string

A drop-in lead-acid replacement: normal float charge and discharge at −40°C in outdoor cabinets.

KS-1.7MWh container system configuration

KS-1.7MWh · System-level specifications KC-1700-720-800
Rated DC-side voltage720 V
Rated capacity per container1.7 MWh
Rated power800 kW
Rated charge/discharge duration2 h
Cell configuration120420-600 × modular series
Cycle life≥6,000 cycles @80% DOD
System efficiency≥92% (incl. PCS and thermal control)
Operating temperature−30°C to +55°C (liquid-cooled)
IP ratingIP54 (IP55 optional)
Fire suppressionPack-level aerosol + cabinet-level perfluorohexanone
Communication interfaceModbus TCP / IEC 61850 / CAN
Standard size20-ft standard sea container

Selection guide: pick by scenario

ApplicationsFeatured productsKey notes
Telecom base station backupKS-Telecom 48V/600AhLead-acid replacement, works at −40°C
C&I peak shavingKS-C&I 215kWh/100kW1–4 cabinets in parallel
On-site PV-storageKS-1.7MWh + EMSMainly 2h configuration
Residential self-consumptionKS-Home 10kWh/5kWWall-mounted / floor-standing
Power for extreme cold120420-1200 cell−40°C cold start
Heavy-truck battery swapping120420-2500 cellHigh per-cell capacity, fewer in series

The first rule of selection isn't energy density — it's how much usable energy remains under your real temperature profile and discharge rate.

King-Sodium application engineering team
CORE TECHNOLOGY

Materials, structure and process: the moat

The gap between sodium-ion and lithium-ion is not just the periodic table: it lies in cathode crystal structure, anode sodium-storage mechanism and the whole line's process window. King-Sodium has engineered all three.

Material system

Polyanion cathode (NASICON-like framework) with a hard carbon anode. The phosphate framework provides structural stability and the lattice distorts little as sodium inserts and extracts, giving better cycle life and thermal stability than layered oxides.

  • Cathode: polyanion, no Co/Ni/Li
  • Anode: biomass hard carbon, stable plateau
  • Electrolyte: wide-temperature formula, conductive at −50°C

Structural design

Full-tab large cylindrical cells with a bottom current collector. Shortening the current path lowers resistance, enabling 1,000A-class pulses while concentrating heat on the liquid-coolable case surface.

  • Full-tab design cuts resistance ~40%
  • Clear axial vent path in cylindrical case
  • Standard size enables automated modules

Manufacturing process

Luoding controls cost through full-line automation and low-energy drying. Sodium batteries don't need lithium's ultra-low-humidity environment, so energy use and depreciation both fall.

  • Line automation ≥92%
  • Dry-room dew point one grade below Li-ion
  • Material cost down to RMB 0.23/Wh
King-Sodium technology roadmapGENERATION ROADMAP
GenerationCathode systemEnergy densityCycle lifeCost targetStatus
G1Polyanion (phosphate)≥ 110 Wh/kg3,000 cycles≤ RMB 0.35/WhMass production
G2Polyanion enhanced≥ 140 Wh/kg6,000 cycles≤ RMB 0.28/WhSmall batch
G3Hybrid system / doping≥ 175 Wh/kg8,000 cycles≤ RMB 0.23/WhPilot line
G4Sodium solid-liquid hybrid≥ 220 Wh/kg10,000 cycles≤ RMB 0.20/WhPre-research

Key test results

High-temperature cycle life (45°C)6,000 cycles
First-cycle Coulombic efficiency90%
Capacity retention at −50°C≥80%
Material cost reduction (vs 2023)−34%

Source: King-Sodium Research Institute internal test reports; conditions per lab method LAB-M-2025-03.

0℃Thermal runaway onset (nail penetration)
0%Lab energy density gain
0%Line yield (Luoding plant)
0RMB/WhMaterial cost (current)
APPLICATION

Six concrete scenarios being rewritten by sodium-ion

Not every scenario suits sodium-ion. We focus on where temperature, cost or resources are a real constraint.

Telecom base station backup

Hundreds of thousands of outdoor base stations still run on lead-acid. Sodium-ion drops straight in, works at −40°C and lasts over 3× longer.

Deployed

C&I peak shaving

As peak-valley spreads widen, storage cabinet payback shortens to 4–5 years. Lower upfront cost directly improves IRR.

Deployed

Residential & off-grid storage

No lithium or cobalt, and no fire at high temperature. In hot, humid markets such as Southeast Asia and Africa, safety is a harder requirement than energy density.

Expanding

Power for extreme cold

Discharging at −50°C means outdoor equipment in northeast China, Inner Mongolia and Northern Europe no longer needs heating pads or dual-power designs.

Deployed

Construction machinery & marine

The large cylindrical cell's 1,000A pulse capability suits heavy-load start-stop duty, and high per-cell capacity reduces series connections in swap mode.

Verified

Backup power & security

For long-standby devices such as smart locks, smoke detectors and emergency lighting, 0V rechargeability removes the after-sales cost of over-discharge write-offs.

Expanding
MARKET OUTLOOK

Sodium-ion doesn't replace lithium — it covers what lithium can't

Global sodium-ion shipments are expected to grow from 13GWh in 2025 to 583GWh in 2030, with storage and low-speed traction driving the increase.

Sodium-ion for storageLow-speed traction & backupConsumer & other
13 GWh
38 GWh
96 GWh
205 GWh
370 GWh
583 GWh
Data basis: aggregated estimates from third-party industry research, covering cell shipments in GWh. 2025 is actual; from 2026E onward figures are forecasts. Sources vary by ±15% and are indicative of trend only.

Sodium-ion vs lithium-ion · key metrics

Comparison basisKing-SodiumLi-ionVerdict
Material costRMB 0.23/WhRMB 0.38/WhSodium-ion wins
Low-temperature performanceDischarges at −50°CSharp capacity drop at −20°CSodium-ion wins
SafetyIntrinsic safety, no fire on nail penetrationHigher thermal runaway riskSodium-ion wins
Cycle life3,000–6,000 cycles3,000–8,000 cyclesMixed
Energy density110–175 Wh/kg160–260 Wh/kgLi-ion wins
Resource constraintsNo Li/Co/Ni, ample resourcesLi/Co supply geopolitically constrainedSodium-ion wins

A measured view on sodium-ion vs lithium

In the near term sodium-ion cannot match NMC lithium on energy density and is no substitute in long-range passenger cars. But in storage, backup, extreme-cold traction and consumer scenarios its cost, safety and wide-temperature advantages are genuinely competitive — and King-Sodium is built around exactly those scenarios.

NEWS

News & updates

182026.03

Phase I of the Luoding 10GWh sodium battery plant reaches full capacity

Phase I lines passed full-load validation with yield steady at 99%; the large-format 120420 series has entered volume delivery.

Capacity
022026.03

King-Sodium Series 5 passes the full SGS safety suite

All 12 safety tests passed, report CGE20251100120081, with UN 38.3 transport certification completed in parallel.

Certification
212026.02

King-Sodium signs storage channel deals with three regional integrators

Covering South, East and Northwest China, the first KS-C&I 215kWh storage cabinets are delivered and grid-commissioned.

Partnership
092026.01

White paper: engineering path of polyanion sodium-ion batteries

A systematic account of King-Sodium's engineering practice and test data across cathode modification, hard carbon anodes and wide-temperature electrolytes.

Technology
WHY KING-SODIUM

Why King-Sodium

From materials to systems, from line to service — four layers of verifiable delivery capability.

Proprietary technology

Formulas, structural design and process parameters are all developed in-house, with no external licensing.

  • Proprietary polyanion cathode formula
  • Hard carbon anode modification
  • Wide-temperature electrolyte
  • 27 granted & pending patents

Capacity assurance

Luoding plant is planned at 10GWh; Phase I is in production with reliable delivery capability.

  • 290-mu industrial park
  • RMB 2 billion total investment
  • Line automation ≥92%
  • Phase I at full capacity

Quality system

Full traceability from incoming materials to finished goods — batch consistency is the core of storage.

  • ISO 9001 / 14001
  • UL 1973 / 9540A
  • IEC 62619
  • Batch test report per shipment

Engineering services

We don't just sell cells — we handle selection, system design, protocol integration and after-sales.

  • 7×12 technical support
  • 48-hour on-site response
  • 3D model & reference design
  • BMS protocol integration

Tell us your duty cycle and we'll run the clean-energy numbers

Share your temperature profile, load characteristics and site conditions; our application engineering team returns selection advice and a lifecycle cost estimate within 3 working days.