Large cylindrical as the route: bringing sodium-ion into real duty cycles

Guangdong King-Sodium Technology Co., Ltd. focuses on the R&D, manufacturing and system integration of polyanion sodium-ion batteries. Our only validation standard is whether it runs reliably under real duty cycles — not whether it looks best in a lab.

10GWh planned capacity
20 RMB 100M total investment
290-mu industrial park
Founded in 2023
Company profileDevelopment roadmapQualificationsQuality system
PROFILE

Company profile

Guangdong King-Sodium Technology Co., Ltd. was founded in 2023, focusing on the R&D, manufacturing and system integration of polyanion sodium-ion batteries. Its production base is in Luoding, Yunfu, Guangdong, with planned capacity of 10GWh, RMB 2 billion total investment and 290 mu of land.

The product portfolio spans three levels: the King-Sodium Series 5 AA-size cylindrical cell for consumer electronics and security; the 120420 large cylindrical series for storage and traction (280Ah to 2,500Ah); and the KS Series storage systems for end applications (containers, C&I cabinets, residential and telecom backup).

Technically, King-Sodium chose the polyanion cathode + hard carbon anode route, passing on the higher-energy-density but thermally less stable layered oxide route. That choice follows our reading of the target scenarios: in storage, backup and extreme-cold traction, cycle life and safety outweigh energy density.

To date the company has filed 27 patents, 15 of them granted. Its core products have passed SGS's 12 safety tests (report no. CGE20251100120081) and obtained UN 38.3 transport certification plus RoHS and REACH compliance declarations.

Key figures

0Founded
0GWhPlanned capacity
0RMB 100MTotal investment
0muIndustrial park area
0itemsPatent filings
0itemsGranted
0%Line yield
0itemsProduct lines

About the company name

Guangdong King-Sodium Technology Co., Ltd. — King-Sodium is the brand name, with the English mark KING-SODIUM. The company uses King-Sodium consistently as its brand, with product names including King-Sodium Series and KS Series.

Mission

Energy no longer limited by temperature or resources — so that every device that must work in extreme environments can find a battery that needs no special care.

Roadmap

Large cylindrical as the technical mainline, polyanion as the material foundation, and storage plus extreme-cold scenarios as the first markets.

Partnership

We are not a closed supplier. We provide selection, system design, protocol integration and on-site support, delivering together with integrators and channel partners.

Responsibility

No lithium, cobalt or nickel, reducing dependence on scarce resources exposed to geopolitics. The route itself is a supply-chain security strategy.

ROADMAP

Three years from lab to mass-production line

2023
completed

Company founded · technology route set

Guangdong King-Sodium Technology Co., Ltd. is founded; the polyanion cathode + hard carbon anode route is set; first-round lab validation is completed and the cathode formulation finalised.

2024
completed

Pilot line built · Luoding base breaks ground

The pilot line is completed, with sample validation for the 14500 and 120420 cells; the Luoding 10GWh production base breaks ground with RMB 2 billion total investment on 290 mu.

2025
completed

Phase I line in production · safety certification obtained

Phase I lines start production and complete ramp-up; King-Sodium Series 5 passes SGS's 12 safety tests (report no. CGE20251100120081) and obtains UN 38.3 transport certification.

2026
in progress

Phase I at full capacity · channel network rolled out

Phase I lines reach full capacity with yield steady at 99%; the 120420 large cylindrical series ships in volume; KS Series storage systems are delivered across multiple scenarios; the regional channel network takes shape.

2027
planned

Phase II begins · G2 platform in production

Phase II line construction begins, targeting large cylindrical cells above 1,200Ah and the G2 platform, while IEC 62619 and UL 1973 cell-level certification is advanced to open overseas markets.

2028
planned

Capacity doubled · sodium solid-liquid hybrid pilot

Capacity target doubles to 20GWh; the G3 hybrid system and sodium solid-liquid hybrid system enter pilot production; material cost target below RMB 0.20/Wh.

Luoding production base

Plant locationLuoding, Yunfu, Guangdong
Planned capacity10 GWh
Total investmentRMB 2 billion
Site area290 mu
Phase I statusPhase I at full capacity
Line automation rate≥92%
Line yield99%
Key productsKing-Sodium Series 5 / 120420-280 / 120420-600
Phase II planLarge cylindrical above 1,200Ah + G2 platform

2026 priorities

  • Phase I lines run stably at full load, with yield above 99%
  • 120420-600 large cylindrical series in volume delivery
  • 50+ KS Series projects delivered
  • Regional channel partners expanded to 30+
  • IEC 62619 cell-level certification completed
  • Material cost below RMB 0.22/Wh
CERTIFICATION

Qualifications & honours

Below are the qualifications and certifications obtained or in progress.

SGS safety test report

Report no. CGE20251100120081 covers 12 safety tests, including overcharge, over-discharge, short circuit, crush, nail penetration and thermal box.

obtained

UN 38.3 transport certified

8 tests including altitude simulation, thermal cycling, vibration, impact, external short circuit, collision and overcharge.

obtained

ISO 9001 quality management system

Covering R&D, procurement, production, inspection, warehousing and after-sales.

obtained

ISO 14001 environmental management system

Covering waste management, energy use and environmental protection in production.

obtained

IEC 62619 industrial battery safety

Safety requirements for secondary lithium batteries in industrial and storage applications — a key item for EU market access.

in progress

UL 1973 / UL 9540A

Cell level passed; module- and system-level thermal runaway propagation tests are in progress.

in progress
Qualifications / certificationsContentYearStatus
SGS safety test reportCGE202511001200812025Obtained
UN 38.3 transport certified8 transport safety tests2025Obtained
ISO 9001Quality management system2024Obtained
ISO 14001Environmental management system2024Obtained
RoHSRestriction of hazardous substances2025Obtained
REACHRegistration, Evaluation, Authorisation of Chemicals2025Obtained
IEC 62619Industrial secondary lithium battery safety2026In progress
UL 1973Stationary storage battery safety2026In progress
UL 9540AThermal runaway propagation test2026–2027In progress

Note on certification progress

Some certifications (such as UL 1973 / UL 9540A) have long test cycles spanning cell, module and system levels. King-Sodium advances cell level first and system level next, so core products gain market admission as early as possible. The latest status can be provided during commercial discussions.

QUALITY

Quality assurance system

Storage system quality isn't assured by final inspection — it's locked in by the parameter window of every process step.

Incoming inspection

Full-batch inspection of incoming raw materials, with retained samples of key materials.

  • Re-test of cathode particle size and specific capacity
  • Hard carbon precursor ash and surface-area testing
  • Electrolyte moisture and conductivity testing
  • Aluminium foil thickness and tensile testing

Process control

Real-time monitoring of key process parameters, with automatic blocking beyond thresholds.

  • Inline coating area-density inspection
  • Closed-loop winding tension control
  • Filling volume accuracy ±1%
  • Sealing pressure and torque monitoring

Finished-goods testing

Capacity, resistance, self-discharge and safety sampling before every shipment.

  • Capacity sorting to ±2% consistency
  • Resistance and self-discharge testing
  • Sampling of the 12 safety tests
  • Factory test report shipped with every order

Traceability system

Full-chain data retention from material batches to finished-goods serial numbers.

  • Unique cell serial number
  • Production parameters and operator records
  • Traceable for 8 years
  • Proactive recall for abnormal batches

Quality metrics

Line yield99%
First-pass yield (FPY)97%
Capacity consistencywithin ±2%
Customer complaint rate≤0.5%
On-time delivery rate≥97%

After-sales & warranty

  • Cell warranty 3 years / system warranty 5 years (extendable to 8)
  • 7×12 technical support hotline
  • On-site response within 48 hours (in-province)
  • Free replacement for non-user damage within warranty
  • Annual state-of-health report provided
  • Remote data access and fault alerts

Want to know more about King-Sodium?

Request the company profile, product datasheets and certification files, or arrange a visit to the Luoding production base.